AMC30215MXP
MXP Mzuri 115mm Subsoil Point OEM() Tungsten
Maxipart® Mzuri Tungsten Point (115mm) 1. The base metal is a one-piece cast alloy point/wing offering far greater wear properties and better fitment than fabricated pressed steel parts.2. Tungsten tiles are perfectly positioned on the nose and wings to ensure the correct profile is kept throughout its extended life.3. Added ridges to the wings to further extend their life.4. Integral roll pin protection within the casting.
POA
-
+
AMC30216MXP
MXP Mzuri 160mm Seed Point OEM() Tungsten
Maxipart® Features & Benefits; 1. The base metal is one-piece cast steel point/wing offering far greater wearproperties than a fabricated wear point.2. Extended tungsten on the wing right to the body and a tall tungsten tile on the nose (45mm) for excellent wear resistance.3. Added ridges to further improve the life of the wings.4. Integral roll pin protection within the casting.
POA
-
+
APC262
Claydon Following Tine 10mm
Following Tine 600mm x 10mm
10ST-AC3
POA
-
+
APC1062MXP
MXP Vaderstad Drill Disc 410mm
Maxipart® Drill Disc Shallow Cut-away 16” (410mm) - 5 Hole 1. Slow press to eliminate disc distortion.2. Cut rather than pressed bolt holes to ensure perfect fitment every time.3. Outer edge cut onto each disc individually for optimal sharpness.4. Each scallop individually cut.5. Optimum hardness ensures extended wear life without cracking.
OEM (310526/451371)
POA
-
+
AMC30217MXP
MXP Mzuri 40mm Seed Point OEM() Tungsten
Maxipart® Features & Benefits; 1. The base metal is a one-piece cast steel point offering far greater wear properties and fitment than fabricated pressed steel parts.2. Extended tungsten on the nose (45mm) for excellent wear resistance.3. Integral roll pin protection within the casting.
-
-
POA
-
+
AMC30218MXP
MXP Mzuri 60mm Subsoil Point OEM() Tungsten
Maxipart® Mzuri Narrow Tungsten Point (60mm) 1. The base metal is a one-piece cast alloy point/wing offering far greater wear properties and better fitment than fabricated pressed steel parts.2. Tungsten tiles are perfectly positioned on the nose and wings to ensure the correct profile is kept throughout its extended life.3. Added ridges to the wings to further extend their life.4. Integral roll pin protection within the casting.5. Hard facing added to back up tungsten tile and to ensure shape is maintained throughout the life of the point.
-
-
POA
-
+