Rapid Key:   = Hard Facing   = Tungsten

Carrier/Ripper Leg 730mm, L730mm x W25mm x T50mm, 6 holes

Universal Point L222mm x W40mm x T8mm - Ø-Ø 40mm

Agrilla Cobra Tine L560mm x W45mm x T10mm

Maxipart® Reversible Point L210mm x W40mm x T8mm

1. 8mm thick, as opposed to standard 6mm points.

Maxipart® Rexus Disc Shallow Cut-away 410mm

1. Slow press to eliminate disc distortion.
2. Cut rather than pressed bolt holes to ensure perfect fitment every time.
3. Outer edge cut onto each disc individually for optimal sharpness.
4. Each scallop individually cut.
5. Optimum hardness ensures extended wear life without cracking.

Crossboard Tine L515mm x W45mm x T10mm - Ø-Ø 45mm
Height to frame 370mm (Excluding Point)

Crossboard Tine L510mm x W80mm x T10mm
Height to frame 330mm (Excluding Point)

Maxipart® Crossboard Point L240mm x W100mm x T10mm - Ø-Ø 45mm

Maxipart® Drill Disc Shallow Cut-away 16” (410mm) - 5 Hole

1. Slow press to eliminate disc distortion.
2. Cut rather than pressed bolt holes to ensure perfect fitment every time.
3. Outer edge cut onto each disc individually for optimal sharpness.
4. Each scallop individually cut.
5. Optimum hardness ensures extended wear life without cracking.

Maxipart® Vaderstad Rapid Disc 450mm Cut-away 18"

To fit newer Vaderstad Rapid drills

1. Slow press to eliminate disc distortion.
2. Cut rather than pressed bolt holes to ensure perfect fitment every time.
3. Outer edge cut onto each disc individually for optimal sharpness.
4. Each scallop individually cut.
5. Optimum hardness ensures extended wear life without cracking.

Coulter Tungsten

Following Tine Single Top Fixing 490mm x 12mm

Following Tine 550mm x 12mm

Packer Scraper