Topdown (Serial Number 1650 Onwards) Key:   = Hard Facing   = Tungsten

Maxipart® Point Tungsten 50mm
AMC30505MXP

1. Deeply recessed bolt holes to stop wear on the bolt head
2. Hard facing added to the side to further increase life
3. Slightly raised center tapering to edges to help with soil flow. This has proved extremely popular in shallow cultivations.
4. Three tungsten tiles configuration helping with penetration, but also giving a level profile in the cultivated ground.

Maxipart® Point Tungsten 80mm
AMC30506MXP

1. Deeply recessed bolt holes for extra protection
2. Slightly raised center tapering to edges to help with soil flow. This has proved extremely popular in shallow cultivations.
3. Three tungsten tiles configuration helping with penetration, but also giving a level profile in the cultivated ground.

Guide Board 80mm

Wing 205mm

Maxipart® Wing 200mm
AMC30501BMXP

1. Tungsten plaques butted into the bend of the wing to prevent wear at this often unprotected and vulnerable area.
2. Extra thick wings with countersunk bolt holes for bolt head/nut protection & countersunk bolt holes for bolt protection.

Maxipart® Disc Cut-Away 19” (470mm)

1. Slow press to eliminate disc distortion.
2. Cut rather than pressed bolt holes ensures perfect fitment every time.
3. Outer edge cut onto each disc individually for optimal sharpness.
4. Each scallop individually cut.
5. Optimum hardness ensures extended wear life without cracking.