Cultus/Swift/Opus Key:   = Hard Facing   = Tungsten

Vaderstad 50/80 Point Tungsten.

Maxipart® Point Tungsten 50mm
AMC30505MXP

1. Deeply recessed bolt holes to stop wear on the bolt head
2. Hard facing added to the side to further increase life
3. Slightly raised center tapering to edges to help with soil flow. This has proved extremely popular in shallow cultivations.
4. Three tungsten tiles configuration helping with penetration, but also giving a level profile in the cultivated ground.

Maxipart® Point Tungsten 80mm
AMC30506MXP

1. Deeply recessed bolt holes for extra protection
2. Slightly raised center tapering to edges to help with soil flow. This has proved extremely popular in shallow cultivations.
3. Three tungsten tiles configuration helping with penetration, but also giving a level profile in the cultivated ground.

Wing 205mm

Maxipart® Wing 200mm
AMC30501BMXP

1. Tungsten plaques butted into the bend of the wing to prevent wear at this often unprotected and vulnerable area.
2. Extra thick wings with countersunk bolt holes for bolt head/nut protection & countersunk bolt holes for bolt protection.

Maxipart® Vaderstad Half-Moon Point 50mm Tungsten

1. Low disturbance option, especially good for cutting through heavy clays and reducing surface clods.
2. Tungsten on nose and shin to ensure extended wear life.

Levelling Disc 500mm RH.